A290 Qmobile 3G Firmware 100% Free Download
Download Here
SP Tool Download
How To Flashing A290 For Sp Tool
Flashing A290 QMobile
1. first time, please Install driver for A290 QMobile
that already downloaded before.
2.Extract the other downloaded file +(firmware and flash tool)+ save in anywhere on your hard drive.
3.Then remove your back case, battery, sim card and SD Card if installed
4.Next, Connect your A290 QMobile
will detect the new hardware
5.Then, release USB data cable from the PC.
6. Open SP flash tool software and click scatter load. find A290 QMobile
7. A290 QMobile
scatter storage location earlier.
8. In the Scatter Loading field Go to Tha folder where you extracted the Flash Tool and select MT6752_Android scatter
Flash _ Install Firmware A290 QMobile
9..On download tab, ensure you have selected download only option from drop down menu, see below picture
Flash / Install Firmware A290 QMobile
10..Then, click download button on top right and connect your A290 QMobile
with USB cable in phone switch off position.
11.Process will run automatic, and you can see the red stripe showing download percentage at bellow
When your process complete, you can see a green circle with tick mark
Flash / Install Firmware A290 QMobile
12.Now disconnect your A290 QMobile
Intall you battery
13.Then, start your A290 QMobile on the first booting it will take a long time to start
