Prepare Flash X 25 QMobile
Firmware Stock Rom X 25 QMobile
Latest Version Of Sp flash tool
USB Driver MTK Driver X 25 QMobile
How To Flash SP Tool
Flashing X 25 QMobile
1. first time, please Install driver for X 25 QMobile that already downloaded before.
2.Extract the other downloaded file <<<(firmware and flash tool>>> save in anywhere on your hard drive.
3.Then remove your back case, battery, sim card and SD Card if installed
4.Next, Connect your X 25 QMobile will detect the new hardware
5.Then, release USB data cable from the PC.
6. Open SP flash tool software and click scatter load. find X25 Q Mobile
7. X25 Q Mobile scatter storage location earlier.
8. In the Scatter Loading field Go to Tha folder where you extracted the Flash Tool and select MT6752_Android scatter
Flash _ Install Firmware X 25 QMobile
9..On download tab, ensure you have selected download only option from drop down menu, see below picture
Flash / Install Firmware X 25 QMobile
10..Then, click download button on top right and connect your X 25 QMobile with USB cable in phone switch off position.
11.Process will run automatic, and you can see the red stripe showing download percentage at bellow
When your process complete, you can see a green circle with tick mark
Flash / Install Firmware X 25 QMobile
12.Now disconnect your X 25 QMobile
Intall you battery
13.Then, start your X 25 QMobile . (remember, on the first booting it will take a long time to start>
